Embossing crucible TYMK-765A

Embossing crucible TYMK-765A

03.06.2021

  1. TYMK-765A are equipped with 2 foil broaches and are programmed and controlled by modern CNC;
  2. Centralized lubrication system for all rubbing parts and mechanisms of the machine with manual pumping. Convenient for the owner of the machine - you are sure that the machine is always lubricated - and the operator is not too lazy to service the machine;;
  3. Protective frames of safety system barriers - in accordance with CE standards;
  4. Assembly, processing of all working parts is made with a higher quality - for the European market;
  5. Convenient sliding die mounting frame - allows you to avoid pulling out a heavy frame each time for correction and adjustment and installation of the die. And women should operate the machine;
  6. Modern control system with independent foil unwinding drives;
  7. Imported encoders that control sensors;
  8. Electromagnetic clutches and brakes;
  9. 2 heating zones;
  10. The pressure can be turned off or adjusted while the machine is operating from the remote control;
  11. Automatic circulation counter;
  12. Convenient and ergonomic control panel , from which you can set all machine operating parameters;
  13. Safety guards and advanced operator safety system;
  14. Overload protection;
  15. Sliding bearings made of high-quality alloyed alloys, avoid friction and reduce vibration;
  16. The flywheel provides high torque and high pressure;
  17. One-piece cast frame, made of high-tech materials, makes it possible to work with high pressure;
  18. Sensitive electromagnetic coupling;
  19. Rationally located working area allows you to move the plate to the optimal position;
  20. Adjustable holding of the plate in the closed position;
Share