Production of printed forms on CTP SCREEN PLATERITE 8800 II UP TO B1 FORMAT!

The Wolf Group of Companies offers its services for printing offset printing plates.

Technical characteristics:

• Equipment: Screen PlateRite 8800 II.
  
• Plate size used for the needs of the Wolf Printing House: 490x370x0.15 mm; 720x557x0.30 mm; 743x557x0.30 mm; 1030x790x0.30 mm.
• Minimum plate size: 450x370 mm; Maximum plate size: 1160x940 mm; plate thickness: 0.15-0.3 mm.
• Output speed: 30 plates per hour (regardless of format)
  
• Maximum resolution: 2540 dpi;
  
• Support for regular raster, 20 micron stochastics, hybrid rasterization;
  
• Exposure method - thermal;
  
• Errors, distortions, etc. P. There are no incidents between colors in principle.
  
• Consumables – FUJI.
  

For our work, we use only the best thermal plates “FUJI”, the quality of which ensures the ability to work with UV inks without thermal firing, which have an enviable circulation resistance, scratch resistance (including and when using dusty papers, metallic inks) and chemicals of the printing process.

• Precise plate exposure system allows you to increase the productivity of the printing machine by reducing makeready time.
  
• No problems associated with dust, air bubbles, installation inaccuracies.
  
• Reproduction and dot transfer in the range of 2-98% at 175 lpi.
  
• Sharper dot edges make it possible to quickly achieve printing parameters (ink-water balance), which not only improves the visual quality of prints, but also makes it easier to apply hybrid screening methods.
  
• Single-step process gives higher stability of results, improves the accuracy of image registration in printing, which speeds up the preparation of printing machines for printing runs
  
• Due to the automation of many elements of the process, the negative influence of the “human factor” is reduced.