Automatic creasing and folding machine Morgana DigiFold Pro

The ability to punch and automatically fold a product made on thick paper makes this machine indispensable. Morgana's patented creasing and folding technologies, high operating speed and large format allow this machine to be used in both digital and offset printing houses.

By combining creasing and folding functions in one device, MORGANA has created an easy-to-use handling and maintenance of tools for processing printed products. DigiFold Pro is equally effective on toner prints, complex media, laminated prints and high-density media. This machine allows you to automate the post-print processing area and reduce the amount of manual labor, and consequently, waste.

Processing digital prints usually causes difficulties due to the fact that the toner layer on the print may crack along the fold or streaks may appear on it and scratches when folding using conventional folding cassettes. Also, all products are made of coated paper with a density over 160 g/kW. m. must be pre-punched before folding to prevent breakage of the surface layer of chalk. These problems are solved in MORGANA DigiFold Pro, which expands the capabilities of finishing processing.

With MORGANA DigiFold Pro you can, for example, get a creased and folded card on thick paper in one operation. Owners of offset printing equipment will be interested in the high operating speed of MORGANA DigiFold Pro - 6000 A4 per hour (regardless of the number of bigs on the sheet) and the large working format - up to 700 x 385 millimeters. Among the advantages of MORGANA DigiFold Pro, it is necessary to note the ability to perform several operations in one pass: creasing and folding, creasing and perforation, which allows you to obtain completely finished products (invitations, folding booklets, postcards, advertising brochures, etc.). The machine allows you to perform the following types of folds: half, letter, concertina, gate, closed gate, engineering, double parallel.

MORGANA DigiFold Pro uses two of the most successful technologies developed by MORGANA: knife + die creasing and folding using “flying knives”. Creasing using a knife and a DynaCrease die allows you to keep the speed constant, regardless of the number of creases on the sheet. Folding with unique "flying knives" allows you to fold materials up to 400 g/m2.

For consistent feeding and increased productivity when working with digital or coated materials, Morgana DigiFold Pro uses a vacuum paper feeding system with air separation of the foot, lateral alignment and the ability to reload the automatic feeder “on the go.”